|
NG Series Mini 500 |
NOW ONLY $2495.00 |
|
| Suitable for boats from 4 - 7 metres | ||
| Fits neatly into the anchor well | ||
| The motor can be mounted at 30, 45 and 90 degrees to suit the configuration of the anchor well | ||
| 500 watt motor | ||
| Constructed from 316 marine grade stainless steel | ||
| Maximum lifting capacity 195 kilos (when the drum diameter is small) | ||
| Holding capacity at anchor is 1800 kilos | ||
| Rated to 80 amps | ||
| Normal running the Stress Free will use 25 - 30 amps | ||
| To protect the motor, the circuit breaker will trip out if there is a power overload (for example the anchor is stuck on the bottom) | ||
| Recommend dual batteries with the battery switch on BOTH | ||
| Can be deck mounted | ||
Drum capacity |
||
| 70 meters of 8mm nylon plus 6 meters of 6mm shortlink chain OR | ||
| 80 meters of 6mm double braid eye spliced to 5 meters of 8mm nylon and 6 metres of 6mm shortlink chain |
||
| The gearbox mounting holes in the mounting bracket allow the motor and drive to be installed at 4 angles to suit different anchor well configurations. Another 8 adjustment angles are available at 30º and 45º from each of the basic 4 mounting holes. NB (the motor cannot be mounted in the horizontal position to face the baseplate). |
||
| NB: The amount of chain can be lengthened or shortened to meet individual needs. In these situations the amount of rope must be tailored to ensure there is a maintained clearance between the chain and the baseplate. |
||
EMAIL sales@winchsolutions.com.au to place an order