|
Mini 500 $1895.00 |
http://stressfreemarine.com.au/pdfs/2009/miini-anch-winch-lay-draw.pdf CLICK HERE FOR DIMENSIONS ↑ |
|
| Built to suit shallow anchor wells. For example StabiCraft, Trophy | ||
| Has the same drum capacity of the | ||
| Suitable for boats from 4 - 7 metres | ||
| Fits neatly into the anchor well | ||
| The motor can be mounted at 30, 45 and 90 degrees to suit the configuration of the anchor well | ||
| 500 watt motor | ||
| Constructed from 316 marine grade stainless steel | ||
| Maximum lifting capacity 195 kilos (when the drum diameter is small) | ||
| Holding capacity at anchor is 1800 kilos | ||
| Rated to 80 amps | ||
| Normal running the Stress Free will use 25 - 30 amps | ||
| To protect the motor, the circuit breaker will trip out if there is a power overload (for example the anchor is stuck on the bottom) | ||
| Recommend dual batteries with the battery switch on BOTH | ||
| Can be deck mounted | ||
Drum capacity |
||
| Has the same drum capacity of the | ||
| 70 meters of 8mm nylon plus 6 metres of 6mm shortlink chain OR | ||
| 80 meters of 6mm double braid eye spliced to 5 meters of 8mm nylon and 6 meters of 6mm shortlink chain |
||
| The gearbox mounting holes in the mounting bracket allow the motor and drive to be installed at 4 angles to suit different anchor well configurations. Another 8 adjustment angles are available at 30º and 45º from each of the basic 4 mounting holes. NB (the motor cannot be mounted in the horizontal position to face the baseplate). | ||
| NB: The amount of chain can be lengthened or shortened to meet individual needs. In these situations the amount of rope must be tailored to ensure there is a maintained clearance between the chain and the baseplate | ||